You are Here: FAQ ->Dedicated Servers->Linux Root Server->Recovery Tool->Article #3


WebHosting 5.0 This article is for 1&1 Linux WebHosting only.


Rescue system unable to reboot


You may find that the reset command will not work in rescue mode. When you have
repaired your system in rescue mode, switch over to "normal system" in the config
menu. You can then give the command to reboot in the command line, and your system
should boot normally.

SD2B2C405


Print Article
How useful was this article?
(From 5 = Very Useful to 1 = Not useful at all):
1 2 3 4 5


 © 2008 1&1 Internet Inc - About 1&1 Internet