You are Here: FAQ ->Dedicated Servers->Linux Root Server->IP Addresses->Article #8


WebHosting 5.0 This article is for 1&1 Linux WebHosting only.


How to set up reverse mapping


1. Log in to the 1&1 Control Panel at: https://admin.1and1.com

If you have only one package, you will land on the Administration page.
If you have more than one package, select the relevant package to reach
its Administration page.


2. Select IP Address Overview from the Server Administration section.
IP Address Overview

3. Select the IP address and click Reverse Mapping
admin_reverse1

4. Enter the name and click Save.
admin_reverse2

SD2B2C905


Print Article
How useful was this article?
(From 5 = Very Useful to 1 = Not useful at all):
1 2 3 4 5


 © 2008 1&1 Internet Inc - About 1&1 Internet